This guide does not apply to the ABL eM4 product line. For the eM4, configuration is carried out via the ABL Configuration App. The ABL Configuration App is available as an application for mobile devices such as smartphones and tablets. Please refer to the installation manual for further information.
In this guide, you will learn how to adjust the current limitation on ABL eMH2 and eMH3 charging stations. By correctly setting the maximum charging power, the charging station can be optimally adapted to the existing electrical installation and your individual requirements.
Caution: Please coordinate these settings with your qualified electrician, or have them carry out the adjustment directly if anything is unclear.
Step 1: Access the web interface
Here you will find a guide for this.
Step 2: Check the current limitation
Under “Overview → Monitoring”, you can check the currently set current limit.
Step 3: Adjust the current limit
The limit can be adjusted via “Products → Installation.” Please switch the role to “Installer” here.
Once you are logged in as Installer, you can open the configuration under “Actions.”
Then change the current limit as desired and save.
Switch to the Operation → Load Management tab and enter the same value in the Maximum Current field under Basic Settings.
Switch back to “Products → Installation,” create the new configuration, and confirm it. The charging station will then restart, and the settings will be applied.
