Here you can learn how to integrate the reev software into a GEWISS charging station.
The integration can be done independently in a few simple steps.
Compatible models: I-CON, I-ON, I-FAST
What is necessary in advance so that the integration can take place
reev operator set
The operator / CPO (CPO = Charge Point Operator) or contracted service provider must have received the operator set. Here, you will find the necessary onboarding materials, such as QR code sticker, SIM card and activation codeLaptop (Windows operating system) with GEWISS application installed for configuration. If you do not have this, please contact GEWISS Support
An active internet connection via Ethernet or WiFi to connect to the reev backend.
Step-by-step Integration
In the following chapters, the integration process is demonstrated step-by-step. If you have all the necessary utensils from the previous chapter at hand, you can carry out the integration in parallel.
Choose your GEWISS product
Connect the charging station
Click on "Connect". After the charging station has been successfully connected to the laptop, the "Disconnect" field is displayed.
To apply the settings of the charging station, click "Read All"Then click "Sync Time" to adjust the system time.
OCPP & Connectivity
Insert the following settings:
Central System: wss://ocpp.reev.com
HostName: ocpp.reev.com
OCPP parameters
As a rule, the OCPP parameters should not be changed! Check whether the connection timeout has been set to the value 600.
Save Settings
Click "Write All" to apply the settings you have made. The charging station is then connected to the reev backend and can be put into operation.
