1. Access via the Station’s Wi-Fi Hotspot
The easiest way to access the web interface is by connecting directly to the charging station's Wi-Fi hotspot.
Steps:
Activate the Wi-Fi Hotspot
The charging station automatically emits a Wi-Fi signal in hotspot mode. The SSID (network name) is usually labeled on the device or provided in the installation manual.Connect to the Hotspot
Use your laptop or another device to connect to this Wi-Fi network. No internet connection is required — the connection is only used for local communication with the station.Open the Web Interface
Launch a web browser and enter the following IP address:
http://10.10.10.200This is the default IP address used when connected via the hotspot.
Login and Use
The web interface should now appear. Login credentials may be required — refer to the manual or contact the installer if needed.
🔧 Wi-Fi Hotspot Not Visible?
If the station's Wi-Fi hotspot does not appear, restarting the controller or charging station may help.
If the issue persists, please consult the manufacturer’s installation manual for further instructions.
2. Access via the Local Network
If the charging station is connected to a local area network (LAN) via cable or Wi-Fi, you can also access the web interface through this network.
Steps:
Determine the Local IP Address
The IP address assigned to the charging station within the local network must be identified. You can find it by:Checking the router’s or modem’s web interface (e.g., DHCP client list)
Using a network scanning tool (e.g.,
Advanced IP Scanner)Asking your local IT administrator
Ensure Network Access
Make sure your device (e.g., laptop) is connected to the same local network as the charging station.Open the Web Interface
Open a browser and enter the determined IP address, e.g.:
http://192.168.0.XXXLogin and Use
The web interface should now be accessible. A login may be required.
Additional Notes
No Internet Required: The web interface works without internet access.