Learn how to integrate the reev software into an easee charging station.
The integration can be completed independently in just a few simple steps.
If you already have access to your wallbox and it has an active internet connection, you can proceed with easee | switch operator to reev.
Supported models: Charge Lite, Home, Charge
What is required for the integration?
reev Operator Set
This has been delivered to the operator / CPO (CPO = Charge Point Operator) or the authorized service provider. It contains the necessary onboarding materials such as QR code stickers, SIM card, and activation code.
easee App
You will need the easee app, which you can download from the app stores.
An active internet connection via Ethernet or WiFi to connect to the reev backend.
Step-by-step Integration
The following sections will guide you through the integration process step by step. If you have all the required materials from the previous section ready, you can perform the integration in parallel.
Step 1: Open the easee App
Download from:
Alternatively: access via the easee Portal – http://easee.cloud/auth/signin
Step 2: Create an account
Activate your account using the code sent to your phone, and then log in.
Step 3: Start the WiFi signal
Before the charging station can be connected to Reev, press the button above the LED light until it turns green. The station will now emit a WiFi signal.
Step 4: Select “Products” and click on “Add Product”.
Choose the charging robot.
Step 5: Enter the serial number and the ProductPin.
You can find these on the charging station or on the back of the manual.
Step 6: Click on “View product”
The charger is now linked to the account.
Step 7: Scroll down and click on WiFi
Select a WiFi network and click Save.
Step 8: Scroll up and click on the “Sites” option at the top
Step 9: Choose the operator and search for Reev
Click on Reev, then click on “Pair”.
Step 10: Success!
The charging station is now connected to the Reev backend.
Next Steps
To fully use your charging infrastructure, please visit the following onboarding links:
https://install.reev.com/cpo-onboarding – For the electrical specialist, to access and set up all required infrastructure data.
https://reev.com/reev-connect-setup/ – For the operator, to access and set up all required operator data.